Interzinc B. Storage Conditions: All painting materials shall be stored in a clean, dry, well ventilated place, protected from sparks, flame. A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc B complies with SSPC Paint 20 and contains minimum 80%. Interzinc Call for Price. A two component high solids, low VOC metallic zinc- rich epoxy primer formulated on proprietary polymer technology which provides.
|Published (Last):||25 June 2018|
|PDF File Size:||1.98 Mb|
|ePub File Size:||20.37 Mb|
|Price:||Free* [*Free Regsitration Required]|
Upon completion of installation, all excess material, overspray and debris must be cleared and removed from the job site.
At project closeout, provide to Owner or Owners Representative an executed copy of the manufacturer’s standard limited warranty against manufacturing defect, outlining its terms, conditions, and exclusions from coverage.
Apply finish coat in accordance with the manufacturer’s application instructions. Moderate Atmosphere Applications – Interzimc and coastal areas. Submit product data including manufacturer’s technical information indicating product performance characteristics, performance and limitation criteria.
Protect adjacent areas from over spray of coating material. For each finish product specified, two samples representing actual product, color, and finish. Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to view in all rooms and spaces except mechanical rooms, electrical rooms, and utility rooms. Maintain environmental conditions temperature, humidity, and ventilation within limits recommended by manufacturer for optimum results.
Low Atmosphere or Interior Applications – Rural area, low pollution, dry environments. All products listed in this section must be manufactured under the appropriate follow-up service with each container bearing the certified label mark.
Interior environments with permanent condensation and pollution. Provide ventilation in areas to receive work of this section during application and minimum 24 hours after application. Pipes, ducts, conduits, hangers and supports, equipment, and equipment enclosures exposed to weather or view – corrosion-resistant finish.
Submit applicators current certification as a manufacturer trained and approved applicator. Apply approved primer to properly cleaned substrate in accordance with manufacturer’s application instructions. Store materials in strict accordance with manufacturers documented instructions. Moderate sulpher diuoxide levels. Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
All surfaces to receive coatings must inteerzinc clean, dry and free of oil, grease, loose mill scale, dirt, dust or other foreign substances which would impair bond interzic the material to the substrate. Temporary protection and heat shall be maintained at this minimum temperature for 24 hours before, during and 24 hours after material application. Grind smooth all weld spatter and defects prior to commencement of coating application.
Where necessary, cleaning or other corrections of the surfaces to receive coatings are the responsibility of the installer of the incompatible substrate.
Severe Atmosphere Application – Industrial areas with high humidity and aggressive environments. Mild Atmosphere Applications- Urban and industrial atmospheres. Information must demonstrate equivalence of product and performance to the specified material and complete systems. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
Do not commence application of coatings until the contractor, applicator and inspector have examined the surfaces to receive Work in this section, and determined that the surfaces are acceptable to receive the specified materials.
Submit manufacturer documentation that the fireproofing product complies with the specified contract requirements.
Interzinc – A k i r a
Substrate and air temperature shall be in accordance with the manufacturers requirements. Steel substrate temperature 3315 be a minimum of 5 deg F 3 deg C above the dew point of the surrounding air for a period of interzjnc hours prior and during the application of the material.
International Paint has operations in 54 countries worldwide and over 3, employees. Deliver materials in manufacturer’s original, sealed, undamaged container with identification label intact. Delete the next paragraph if not applicable. Submit manufacturer’s written installation instructions.
Verify that substrate and workspace temperature and humidity conditions are in accordance with requirements of this section. Regional Materials- 20 percent extracted, processed and manufactured regionally: This section is based on the products of International Protective Coatings, which is located at:. Company specializing in applying the work of this section with a minimum of three 3 years documented experience and certified by the manufacturer. If necessary for job schedule, the General Contractor shall provide enclosures and heat to maintain proper temperatures and humidity levels in the application areas.
The relative humidity of the application area shall not exceed a maximum of 85 percent for 24 hours prior, during and 24 hours after the application of the material. The following is intedzinc example of how a mock-up on a large project might be specified. Interior chemical processing areas and swimming pools.