This British Standard is the official English language version of. EN Together wi th BS EN i t supersedes. BS EN l which. BS EN BRITISH STANDARDOffshore containers and associated lifting sets — Part 1: Offshore containers — Design, manufacture. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European.
|Published (Last):||15 May 2008|
|PDF File Size:||12.19 Mb|
|ePub File Size:||13.83 Mb|
|Price:||Free* [*Free Regsitration Required]|
In order to avoid initiation of brittle fracture, the steels shall possess adequate fracture energy. Container kg Intermediate deck kg Certificate no. The container shall be clear of the ground throughout the test. Doors shall be capable of being secured in the open position.
Pad eyes shall be designed for a total vertical force of 3 R g. For undated references, the latest edition of the referenced document including any amendments applies. The chemical composition shall be in accordance with that set out in Table 2 and mechanical properties shall be in accordance with Table 3. Such forgings shall be made from fully-killed and fine-grain treated non-ageing steel. It shall be built in conformity with plans and data and using tooling comparable to those planned for subsequent production.
Pad eyes shall be so designed as to permit free movement of the shackle and sling termination without fouling the pad eye. Contact the Information Centre. Hollow sections specified in EN or ENwhich meet the requirements in 6. The purpose of these tests is to prove the design, material and method of manufacture.
12709-1 container number shall be prominently and indelibly displayed on all sides of the container as viewed from ground level in characters of a contrasting colour, not less than 75 mm high.
It may either be fabricated especially for type testing or selected at random from a production series 3. The minimum internal dimensions of the forklift pockets shall be mm x 90 mm. Only materials with non- ageing properties shall be used.
Full text of “Safety British Standards”
Primary structure is divided into two subgroups: In addition, certificates of examination and tests shall be issued as described in The plates shall be fitted to a door, or, on containers with no doors, in a prominent position. For containers with only one pad eye, that pad eye shall be designed for a total vertical force of 5 Rg.
Search the history of over billion web pages on the Internet. NOTE Appropriate provision should be made to ensure that there is no risk to the health and safety of the inspector 8. This force may act in any horizontal direction on the comer post. Pockets shall be located as far apart as practicable but need not be more than 2 mm apart from the centre of pocket to centre of pocket. Pad eyes shall be welded to the frame with full penetration welds.
Side and roof panels, including sn panels, are not considered to be part of the primary structure 3. Production documents according to this standard shall be prepared and approved before production starts.
NOTE 1 This floor may be covered with a sheathing of wooden planks with a thickness not exceeding 50 mm.
However, maximum concentrated stresses at the hole edges shall not exceed 2 x R at design load. However, offshore containers that fall within the definition of a container in the CSC, and which are used internationally for transport of cargo, must also be certified to that convention. The container shall be suspended from a quick release hook. The impacting comer shall be the one expected to have the lowest rigidity.
BS EN 12079-1:2006
Various Sb electronic information services are also available which give details on all its products and services. BSI also holds the copyright, in the LTK, of the publications of the international standardization bodies.
Tank containers for liquids, gases and pressurized dry bulk ISOSeries 1 freight containers — Specification and testing — Part 4: See informative Annex for guidance. NOTE Not all container walls are corrugated. Alloy steels shall be delivered in quenched and tempered condition.